Description
- Specification filling nipple (FN), M 10 x 1 male (12 670) Angled spout, M 10 x 1, 150 mm (12 635)
- Precision machined coupler, 4 claws, M 10 x 1 female (12 643)
- Sales package, with Bar code Special notes Operates with greases up to NLGI grade 2 at 20°C
- Designed for use in rough conditions, wall thickness grease gun tube: 1 mm
- Plunger with exactly fitting when using bulk grease or cartridge due to the flexibility of the push rod, the plunger can be inserted into damaged cartridges or cartridges not exactly matching the standard dimensions acc. to DIN 1283 TÜV
- Certified pump piston, cylinder and O-ring with 6 μ fit (no dummy lubrication)
- No dummy (apparent) lubrication.
- Sealing system: O-ring and ball valve prevent grease compressed in the grease gun head from feeding back.
- Performance unchanged after 40.000 actuating cycles
- Separate filling and ventilation valves on grease gun head
- Grease gun head, zinc die casting Z 410
- Sure grip handling due to deep band knurls
- Slip resistant handle on grease gun lever
- The ergonomic handle of the plunger rod assists in overcoming the spring load
- Enables even under extreme backpressure, a variable lubrication pressure with steady effort applied allows lubrication in difficult to reach locations because the smallest lever operation results in grease being pumped reliably to the lubrication point.
- Plunger rod clamp on end cap enables manual pressure to be applied to spring to compress bulk grease, or to force in the plunger in damaged cartridges.
- Push rod can be locked in any position – push rod does not have to be fully retracted to release the spring pressure on the grease (grease does not saponify)
- Push rod can be locked in any position – push rod does not have to be fully retracted to release the spring pressure on the grease (grease does not saponify)
- High-speed ventilation, by half a rotation of the grease gun tube
Part No. 12675125
